HOW TO USE THE MATTRESS:
Heating (temperature adjustment)
1. Connect the controller to the mattress.
2. Turn the temperature knob to 1 (at the triangle), then press Power
button. The power and heating indicator will light up in order.
3. Turn the temperature knob to the desired temperature. Standard
temperature is 5.
4. The heating system's thermostat will keep desired temperature
constant.
5. To start timer, press Power button 2 times. If accidentally left
on the timer will automatically shut off after 8 hrs.
6. To turn off, Press Power button 3 times.

Negative Ion Function- Releases Negative Ions to purify the air
1. To start Negative Ionization, press the Negative Ion Button.
2. The Negative Ion function is independent of the ultra magnetic function
and can be used while mattress is on.

Electromagnetic Wave Indicator
1. Get off the mattress and have no contact with the mattress. Grasp The E-wave button (metal button) on the controller with thumb and index finger firmly. Check the electromagnetic wave indicator light.
2. When EMFs are being emitted, the light will be on.
3. To turn off, turn the button either left or right until the light
blacks out or turns gray. It is safe to use when light is off.
4. When the Power is on, before coming in contact with the mattress,
confirm Electromagnetic Waves are not being omitted.
5. To do this, turn the button on the controller
Ultra Long Magnetic Waves Function (VLF)

1. To start the ultra long magnetic wave function, Press VLF button.
2. If heating system is working, it will automatically power off. The heating
system and the ultra long magnetic function will not work simultaneously.
3. If you press the Power button when the ultra long magnetic function is on
it will power off automatically.
4. The ultra long magnetic function will operate for 40 minutes and then shut off
5. We suggest warming the mattress before using the VLF
function for your comfort.